Probe PT100 compact with conncetion, process 1/2’’ GAS – CTRDIN12

Pt100 class 1/3 DIN, 4-20 mA 2-wire output
DIN connector polyamide fiberglass Faston contacts.
Protective sheath, housing and process connection in 316 L stainless steel
Response time in water at 0.4m/s: T50 less than 3 s
Response time in water at 0.4m/s: T90 less than 5 s
Accuracy of the sensor class 1/3 DIN 0.1%C at 0 °C, 0.27 °C at 100 °C

Characteristics of the transmitter integrated in the body:
Accuracy ±0.08% of full scale
Linearization error: ±0.1% of full scale
Voltage power supply: 8 to 36 VDC with polarity reversal protection
Power supply influence: ±0.01%/V from 24V
Ambient temperature of the housing: -25 to +85 °C
Storage temperature: -25 to +85 °C
Process limit temperature: -25 to +450 °C
For temperatures exceeding 150 °C, allow a length of 120 mm between body and connection
Temperature influence: ±0.02% of full scale / °C
Safety: current greater than 22 mA in the event of sensor breakage
High immunity to noise (radio band rejection filter)

Options
- Other range settings on request
- Calibration on attached Cofrac measuring chain
- Other connection
- Glove finger