|
| Anemometer with alarm |
This anemometer with alarm makes it possible to visualize the speed of the wind and to announce if this one exceeds one of the two adjustable thresholds in order to be able to ensure the protection of the equipment sensitive to the wind
Adjustment of the two thresholds by serrated rollers style coils coder located in frontage
When the speed of the wind crossed the first threshold during more than 3 seconds, a yellow warning light is illuminated and an internal relay is activated
When the speed of wind crossed the second threshold during more than 3 seconds a red indicator is illuminated, an audible alarm of 90 dB engages and the second relay is activated
Polycarbonate case 16,3 X 12,2 X 8,5 mm
Accuracy + 3 km/h Power 12 volts cd. (transformer in option)
Realizable in km/h, MPH or node
Delivered with sensor, cable, stem of fixing |
|
|
| Anemometer “SMART” with indicator of wind orientation |
For the direction and the windspeed of measurement of the wind
Measurement bracket: 0 to 44 m/s
Operating range: -40 °C with +75 °C
Accuracy: ±0,5 m/s for a speed lower than 17 m/s ± 3% from 17 to 30 m/s ± 4% from 44 to 99 m/s
Resolution: 0,19 m/s
Speed of wind: minimum 0,5 m/s maximum: 54 m/s
Dim. (mm): Direct stem: 280 X 419 Mast: Ø 12,7 X 355
Weight: approximately 300 G
Lifespan: from 2 to 5 years according to the environment
Length connecting cable: 3 m
Direction measurement bracket: 0 to 358 °
Operating range: -40 °C with +75 °C
Accuracy : ±5 ° Resolution: 1,4 °
Minimal speed of wind: 0,5m/s
The anemometer adapts to the attachment arm (in option). Ref. M-CA |
|
|
| Micro station 512 K |
This new logger 4 ways represents a solution at lower cost for a use of probes SMART
Have 4 external inputs for probes SMART
Probes SMART are automatically recognized by the logger as of their connection
Possible extension of the external probes up to 100 meters
Memory: 512 K not bird (can record more than 500.000 measurements)
Recording mode: stop of the recording when the memory is full or recording buckles some with crushing of the first memorized values
Frequency of recording: 1 second at 9 a.m.
Clock accuracy : 0 to 2 seconds for the first point and ±5 seconds/week with +25 °C
Mode of starting: immediate by pushbutton or differed on programmed date and hour
Unloading of the data by continuing or not the recording
Speed of unloading: 2,5 minutes for a complete unloading of 512 K
Visualization of the reading in the course of recording
Operating temperature: - with batteries alkaline: -20 °C with +50 °C - with batteries lithium (in option): -40 °C with +70 °C
Dimensions (mm): Thickness 54 Height 114 Width 89
Weight: 500 G
Assembly: mural fixing or on mast Ø 41 mm due to a kit of assembly in option
Tight case being able to receive 2 interfaces of input current 4-20 my or Voltage, closing by 4 screws
Software of necessary configuration: BoxCar Pro 4.3 or higher version |
|
|
| Probe “SMART” of interface of impulse input |
Scale of measurement: 0 to 4093 impulse by interval of minimum recording
Lasted of the impulse: 1 ms
Voltage of maximum input : 3,6 V Mini
Voltage of input : -0,3 V Logical level: low = 0,6 V; high = 2,7 V
Impedance of input/output: 100 kOhms
Weight: 310 G
Length connecting cable: 6,5 m
ELECTRICAL VERSION CONTACT:
Maximum frequency of input : 120 Hz (120 pulsations a second)
Time of closing: 45 µs ± 10%
MECHANICAL VERSION CONTACT:
Maximum frequency of input : 2 Hz (2 pulsations a second)
Time of closing: 327 ms ± 10% normally open |
|
|
|
platinum rtd (pt100) probes
Cliquez pour afficher la liste complète
