|
Pluviomètre à bascule - 88993 |
Collecteur d'eau de pluie (compatible avec enregistreur HOBO) Hauteur : 200mm Diamètre : 203mm (8 pouces) Longueur de câble : 18,29m (60ft) Fourni câble de raccordement (ne peut être enterré) |
|
|
Data Miniature Standalone Loggers of temperature and events/precipitations with optical interface USB |
This new logger with its case seals is connected on the majority of the pluviometers to trough rocking and makes it possible to determine the rate of precipitations, their moment and time, it is also equipped with an internal probe of temperature External type of event: closing relay contact or trough pluviometer Memory size of 64 K, according to the interval enters the events Recording of the events: 16 K to 23 K Recording of the events and the temperature: 25 K to 30 K Delivered with cable for easy connection on trough pluviometers Compact tight case being able to assemble itself in a collector of rain, or a solar radiation free case of protection to measure the temperature in full sun Store up to 16000 swings, which corresponds to 4064 mm of precipitation with a pluviometer of a resolution of 0,254 mm The data can be visualized directly in millimetres or inches The recordings are time redorded, which makes it possible to deduce the hyétogramme External input event Connection: cable length 2 meters with 2 drivers Maximum frequency of input : 1 Hz Resolution: 1 second Closing minimum of contact: 1 ms Locking: 500 ms (eliminates the errors of measurement following the returns from contact) Scale of temperature measurement: -20 °C with +70 °C Accuracy on the temperature measurement: 0,47 °C with +25 °C Temperature resolution: 0,10 °C with +25 °C Answer time in the air to 2 m/s: 10 minutes for 90% Report of checking in temperature on attached chain realizable Cofrac in option The non-volatile memory preserves the data even in the event of worn battery Tight housing IP67 tested NEMA 6 Seal up to 1,5 meters of depth Accuracy of the clock: ±1 minute per month with +25 °C Crush replaceable CR2032 by the user - typical lifespan one year Dimensions (mm): 71 X 33 X 23 - Weight : 50 G |
|
|
Temperature and pluviometry datalogger – RG3-M |
Le pluviomètre enregistreur HOBO RG3-M est un pluviomètre autonome qui permet d’enregistrer les précipitations et la température.
Avantages - Boîtier en aluminium - L’enregistreur peut être installé dans un boîtier anti-radiation solaire pour mesurer la température de l’air - Peut être installé sur une surface plane ou sur un mât - Le pluviomètre se vide automatiquement pour permettre des campagnes de mesures en continu.
Mémoire : - 16000 à 23000 mesures lorsque enregistrement de précipitations uniquement - 25000 à 30000 mesures lorsque enregistrement de la température et de précipitations Pile : Dépend de la fréquence d’ événement Norme : CE Température Plage de mesures : -20°C à 70°C Précision : ± 0,47°C à 25°C Résolution : 0.10°C à 25°C Intervalle d’enregistrement : 1 seconde à 18 heures - configurable Précipitations Plage de mesures : Jusqu’à 320 cm Précision : ± 1%, jusqu’à 20mm/heure Résolution : 0,2 mm Résolution de l’horodatage : 1 seconde Plage max de pluie : 12,7 cm par heure |
|
|
|