|
Thermocouple probe to insert type K – SOPIK3130TE2 |
Sonde thermocouple K classe1 Gaine de protection inox 316L Ø 3mm longueur 130 mm Poignée inox 316L Ø 10 mm longueur 85 mm Câble PFA/PFA plat Terminaison connecteur miniature mâle Soudure chaude à la masse Température : -50/250°C |
|
|
Thermocouple probe to stick – STCS |
Sonde thermocouple J,K ou T sous enveloppe silicone de dimensions 40x13x3 avec une face autoadhésive Sortie sur câble isolé PFA/silicone section 2x0,22 mm² Température d’utilisation : -50 à 160°C Soudure chaude isolée
Options : - Autre couple, autre longueur de câble sur demande |
|
|
Compost probe thermocouple type T with datalogger display – SCIUX100 |
Exemple d'application du produit
Caractéristiques canne et capteur : Capteur thermocouple : type T, classe 1. Soudure chaude à la masse. (±0.5°C pour -40/125°C) Gaine de protection : acier inox 316 L, Ø16 x 2 mm de longueur 1000 ou 1500 mm avec extrémité pointue et rétreinte sur 30 mm au Ø 10 mm. Livré avec 2 poignées plastique amovibles Sortie câble PFA/PFA de longueur 150 mm. Terminaison connecteur miniature mâle pour connection à l'enregistreur. Température d’utilisation : -50/250°C
Spécifications enregistreur thermocouple T : Montage amovible de l'enregistreur dans un boîtier étanche à l’aide de velcro. L'enregistreur permet d'enregistrer la température avec un capteur thermocouple T. En utilisant le logiciel HOBOWare, il est facile de configurer des alarmes hautes ou basses pour les campagnes d'enregistrements. Il est également possible de configurer des salves de mesures (intervalle plus rapide) en fonction de certaines conditions. L'appareil permet aussi de calculer certaines statistiques (le minimum, le maximum, la moyenne ou l'écart-type). De faible encombrement, l'écran LCD incorporé à l'appareil permet de visualiser la température, l'état de la campagne, le niveau de la batterie et la mémoire utilisée entre deux déchargements.
* Mesure du thermocouple - T : plage de -260 à 400°C; précison de ±0.6°C ± précison sonde couple; résolution 0.02°C
*Enregistreur - plage d'utilisation : en enregistrement de -20/70°C; 0/95% d’humidité relative; lancement et déchargement de 0/50°C (spécification USB) - intervalle d'enregistrement : de 1 seconde à environ 18 heures - mode d'enregistrement : normal, salve ou statistique - mode mémoire : arrêt ou bouclage quand mémoire pleine - mode de démarrage : immédiat, par bouton poussoir ou date et heure programmée - mode de relancement : par bouton poussoir - précision dans le temps : ±1 minute par mois à 25°C - autonomie : 1 an, avec intervalle d'enregistrement de 1 minute et intervalle d'échantillonnage de plus de 15 secondes - batterie : CR2032 (3V) - afficheur : visible de 0 à 50°C; peut être plus lent ou ne plus afficher pour des températures en dehors - mémoire : 512Ko (env. 208000 enregistrements) - temps de déchargement mémoire pleine : 90 secondes - dimension : 36.6x59.4x15.2 mm - poids : 30 grammes - indice de protection : IP50 - norme : CE
Boîtier étanche : - ABS à couvercle transparent - 110x80x65 mm (avec couvercle) - IP65 |
|
|
|
|
Thermocouple probe with magnetic contact – SCM |
Sonde de contact pour matériaux ferreux, thermocouple J, K, T, N Version économique Soudure chaude à la masse Aimant Ø 19 - épaisseur 8 mm Sortie sur câble isolée soie de verre/soie de verre, tresse inox 2x 0,22m² Longueur 2 mètres Terminaison dénudée ou connecteur compensé miniature mâle Température : 100°C
Option : - autre longueur sur demande |
|
|
Thermocouple probe of contact with pad – TCL |
Ce produit peut être destiné à différents types d’application où le plaquette inox peut être brasé, soudé ou simplement plaqué sur la pièce à contrôler Produit disponible en couple type J, K et T Avec câble isolé soie de verre ou soie de verre/tresse inox externe Longueur variable de 1 à 3 mètres (autres longueurs sur demande) Plaquette inox de dimensions 25x10 mm épaisseur 0,5 mm Soudure chaude à la masse Température d’utilisation : -20° à +400°C |
|
|
Thermocouple probe to screw on nozzle |
Sonde : thermocouple J, K ou T (selon CEI 60584 class 1) Type de soudure chaude : à la masse Raccordement tournant : M6X100, 1/4"BSF ou 1/4"UNF câble de raccordement : soie de verre/soie de verre/tresse inox externe 2x0.22mm² Température maximale d’utilisation : 400°C
Options : - Autre longueur de câble ou autre filetage sur demande - Réalisable en version coudée sur demande |
|
|
Thermocouple probe lined |
Gaine de protection en Inconel pour thermocouple type K ou acier inox pour thermocouple J Sonde thermocouple suivant norme CEI 60584 Soudure chaude isolée Plot de jonction inox Ø 5x30 pour chemisé en Ø 0,5; Ø 4,5x30 pour chemisé en Ø 0,25 Terminaison par câble isolé PFA, longueur 2 mètres Température d’utilisation : * couple K : -100 à +900°C * couple J : -100 à +600°C
OPTIONS - Autre longueur, autre thermocouple sur demande - Raccord coulissant |
|
|
Probe thermocouple screw-in with intermediate tube |
Protection sheath: stainless steel 316 L - Ø 8 X 1 mm Probe: thermocouple beaded J or K following DIN standard CEI 60584 class 1, simple or double Tube intermediate: 120 mm (under bottom of head 145 mm) Connection: 1/2 " cylindrical plug GAS out of stainless steel 316 L Head of connection: type B out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Temperature of use: -50 to +600 °C
Option: covered sheath PTFE (maximum temperature 200 °C), head with fast locking or head PVC, analogical output by converter Another length, another diameter or another connection on request |
|
|
Probe thermocouple screw-in |
Protection sheath: Stainless steel 316 L - Ø 8 X 1 mm Probe: thermocouple J or K following DIN standard CEI 60584 class 1, simple or double Connection: 1/2 " cylindrical plug GAS out of stainless steel 316 L Head of connection: Type B out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Temperature of use: -50 to +600 °C Option: covered sheath PTFE (maximum temperature 200 °C), head with fast locking or head PVC, analogical output by converter Another length, another diameter or another connection on request |
|
|
Probe thermocouple with head of the type MA (miniature) and connection of fixation |
Protection sheath: stainless steel 316 L, Ø 6 X 1 mm or Ø 7 X 1 mm or Ø 8 X 1 mm Probe: thermocouple J or K following DIN standard CEI 60584 class 1, simple or double Connection: 1/2 " stainless steel plug 316 L Head of connection: type MA (miniature) out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M16 X 150), Ø of tightening from 2,5 to 8 mm Temperature of use: -50 to +600 °C according to model
Option: sheath covered PTFE (maximum temperature 200 °C) Another length, another diameter or another connection on request |
|
|
Probe TC openwork with head of connection of the type MA and connection of fixing |
Protection sheath: openwork out of stainless steel 316 L, Ø 6 X 1 mm or Ø 7 X 1 mm or Ø 8 X 1 mm Probe: thermocouple J or K following DIN standard CEI 60584 class 1, simple or double Connection: 1/2 " stainless steel plug 316 L Head of connection: type MA (miniature) out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M16 X 150), Ø of tightening from 2,5 to 8 mm Temperature of use: -50 to +400 °C according to model Another length, another diameter or another connection on request |
|
|
Probe thermocouple with metal guard Ø 13,5 mm |
Protection sheath: stainless steel 316 L or refractory stainless 310 Ø 13,5 X 2,3 mm Probe: thermocouple beaded J, K or NR following CEI 60584 class 1, simple or double Head of connection: type B out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Temperature of use: -50 to +1100 °C according to model
Option: sliding connection, attaches oval, head with fast locking Another length, another diameter or another connection on request |
|
|
Probe thermocouple with metal guard Ø 21,3 mm |
Protection sheath: stainless steel 316 L or refractory stainless 310 Ø 21,3 x 2,6 mm Probe: thermocouple beaded J or K following CEI 60584 class 1, simple or double Head of connection: type A out of epoxy aluminium alloy covered, output of cable per glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Temperature of use: -50 to +1100 °C according to model Option: sliding connection, attach oval, head with fast locking Another length, another diameter or another connection on request |
|
|
Probe thermocouple K with metal guard bent Ø 21,3 mm |
Protection sheath: heat-resisting steel 446, stainless refractory 310 or Inconel 600 - Ø 21,3 mm Interior assembly lined unremovable Probe: thermocouple K following the standard CEI 60584 class 1, simple or double Head of connection: type A out of aluminium alloy covered epoxy, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Maximum temperature of use: - refractory steel cladding 446: 950 °C - sheath out of refractory stainless 310: 1050 °C - sheath out of Inconel 600: 1100 °C
Option: sliding connection, attaches oval, head with fast locking Another length, another material on request |
|
|
Probe thermocouple high temperature with ceramic guard Ø 10 mm |
Protection sheath: ceramics Ø 10 mm Probe: thermocouple K or S or B following CEI 60584 class 1, simple or double Head of connection: type B out of alloy of epoxy aluminium covered, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Pipe coupling: heat-resisting steel, Ø 15 mm, length 100 mm Temperature of use: -50 to +1800 °C according to model
Option: sliding connection, attach oval, head with fast locking Another length, another diameter, other connection or another couple on request |
|
|
Probe thermocouple high temperature with ceramic guard Ø 15 mm |
Protection sheath: ceramics Ø 15 mm Probe: thermocouple K or S or B following CEI 60584 class 1, simple or double Head of connection: type A out of epoxy aluminium alloy covered, output of cable per glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Pipe coupling: heat-resisting steel, Ø 21,3 mm, length 150 mm Temperature of use: -50 to +1800 °C according to model
Option: sliding connection, attach oval, head with fast locking Another length, another diameter, other connection or another couple on request |
|
|
Probe thermocouple high temperature with double ceramic guard |
Protection sheath: ceramics Ø 26 X 18 mm Probes: thermocouple K or S or B following CEI 60584 class 1, simple or double Head of connection: type A out of alloy of epoxy aluminium covered, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Pipe coupling: heat-resisting steel Ø 32 mm, length 150 mm Temperature of use: -50 to +1800 °C according to model
Option: sliding connection, attach oval, head with fast locking Another length, another diameter, other connection or another couple on request |
|
|
Probe thermocouple K with metal guard bent Ø 21,3 mm |
Canne pyrométrique. Spécial incinération. Gaine de protection : Polytron Ø 15 ou 20 mm Excellente résistance au choc thermique, mécanique et aux agressions chloriques Sonde : thermocouple K ou S suivant la norme CEI 60584 classe 1, simple ou double Tête de raccordement : type A en alliage d’aluminium revêtue époxy, sortie de câble par presse-étoupe IP68 polyamide (M20 x 150), Ø de serrage de 5 à 12 mm Manchon de raccordement : inox réfractaire Ø 21,3 mm (pour une gaine Ø 15 mm) ou Ø 26,9 mm (pour une gaine Ø 20 mm), longueur 150 mm Température d’utilisation : -50 à +1400 °C selon modèle
OPTIONS : - Autre longueur, autre diamètre, autre raccord ou autre couple sur demande - Transmetteur 4-20 mA |
|
|
Probe thermocouple high temperature with ceramic guard |
Gaine de protection : céramique Ø 6 mm, Ø 8 mm ou Ø 10 mm Sonde : thermocouple K ou S suivant la norme CEI 60584 classe 1, simple ou double Raccordement sur connecteur compensé standard mâle (température maxi. : 200 °C) Manchon de raccordement inox (température maxi. : 600 °C) Température d’utilisation : -50 à +1600 °C selon modèle
OPTIONS : - Raccord coulissant, bride de raccordement sur manchon inox, connecteur céramique haute température 600 °C |
|
|
Probe thermocouple of contact for cylinder in rotation at low speed |
Protection sheath: stainless steel 316 L - Ø 6 X 0,5mm with end fitting in brass contact, length 10 mm, gone up on spring Type of welding: heat with the earth Probe: thermocouple J or K following CEI 60584 class 1, simple Fixing by nut + connection 1/2 " GC Casing stainless steel 304 L - Ø 21,3 mm - length 50 mm Output: cable PFA/braid/PFA - length 3 meters - protected under flexible device stainless maximum Température from use: 250 °C Delivered with nut 1/2 " GC
Option: cable isolated silk from glass/silk of glass/braid stainless for use with 400 °C maximum Another dimension of casing on request |
|
|
Probe thermocouple of telescopic Assembly for the temperature measurement of the level of revolving machines |
Protection sheath: stainless steel 316 L - Ø 6 X 0,5 mm Standard of welding: heat with the earth Probe: thermocouple J or K following CEI 60584 class 1, simple couple with base plate of the standard, simple type JAEGER or double couple with base plate of the type SOURIAU Connection: M12 X 175 with nut and joint PFA Junction box: block out of anodic aluminium output: axial or radial for base plate JAEGER 3 compensated contacts (Series: standard) or SOURIAU 7 contacts Temperature of use: -50 to +250 °C
Option: - connector JAEGER 3 compensated contacts (Series: standard) or SOURIAU 7 contacts - Another length on request |
|
|
Probe smooth thermocouple with head of connection of the type MA (miniature) |
Protection sheath: stainless steel 316 L - Ø 6 X 0,5mm or Ø 8 X 1 mm Probes: thermocouple J or K CEI 60584 class 1, simple Head of connection: type MA (miniature) out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M16 X 150), Ø of tightening from 2,5 to 8 mm Temperature of use: -50 to +400 °C
Option: attach stainless steel or sliding connection Another length, another diameter on reques |
|
|
Probe smooth thermocouple with head of connection of the type B |
Protection sheath: stainless steel 316 L - Ø 6 X 0,4 mm or Ø 8 X 1 mm Probes: thermocouple J or K CEI 60584 class 1, simple Head of connection: type B out of epoxy aluminium alloy covered, output cable by glands IP68 polyamide (M20 X 150), Ø of tightening from 5 to 12 mm Temperature of use: -50 to +400 °C
Option: attach stainless steel, sliding connection, head with fast locking, head PVC or transmitter 4-20 my technical 2 wire Another length, another diameter on request |
|
|
Probe thermocouple with connecting cable silk of glass/silk of glass |
Protection sheath: stainless steel 316 L, Ø 3 X 0,3 mm, Ø 4 X 0,5 mm, Ø 5 X 0,5 mm Probe: thermocouple J or K, isolated or with the mass Connecting cable: silk of glass/silk of glass, section 2 X 0,3 mm² (for sheath Ø 3 mm), 2 X 0,5 mm² (for sheath Ø 4 mm) or 2 X 0,8 mm² (for sheath Ø 5 mm) maximum Temperature of use: +400 °C
Option: sliding connection or attaches sheet stainless steel Autre length, another couple or another diameter on request |
|
|
Probe thermocouple with connecting cable silk of glass/silk of glass/braid stainless |
Protection sheath: stainless steel 316 L, Ø 3 X 0,3 mm, Ø 4 X 0,5 mm, Ø 5 X 0,5 mm or Ø 6 X 0,4 mm Probe: thermocouple J or K, isolated or with the earth Connecting cable: silk of glass/silk of glass/braid stainless, section 2 X 0,13 mm² (for sheath Ø 3 mm), 2 X 0,22 mm² (for sheath Ø 4 mm, Ø 5 mm and Ø 6 mm) Temperature of use: -50 to +400 °C
Option: sliding connection or attaches sheet stainless steel Another length, another couple or another diameter on request |
|
|
Probe thermocouple with connecting cable silk of glass silk of glass/braid stainless and curve spring |
Protection sheath: stainless steel 316 L, Ø 3 X 0,3 mm, Ø 4 X 0,5 mm, Ø 5 X 0,5 mm or Ø 6 X 0,4 mm Probe: thermocouple J or K, isolated or with the earth Connecting cable: silk of glass/silk of glass/braid stainless, section 2 X 0,13 mm² (for sheath Ø 3 mm), 2 X 0,22 mm² (for sheath Ø 4 mm, Ø 5 mm and Ø 6 mm), output protected by spring Temperature curve from use: -50 to +400 °C Option: sliding connection or attaches sheet stainless steel Another length, another couple or another diameter on request |
|
|
Probe thermocouple J with fixing by bayonet for plastic industry |
End fitting : stainless steel 316 L Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: bayonet (2 pins) out of nickelled brass, interior Ø 10 mm, 12 mm, 14 mm, 15 mm or 16 mm Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another bayonet on request |
|
|
Probe thermocouple J with fixing by bayonet for plastic industry |
End fitting : stainless steel 316 L Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: bayonet (2 pins) out of nickelled brass, interior Ø 10 mm, 12 mm, 14 mm, 15 mm or 16 mm Connecting cable: PFA/braid/PFA, 2 X 0.22 mm² Maximum temperature of use: 250 °C Another length of cable or another bayonet on request |
|
|
Probe thermocouple J bent with fixing by bayonet for plastic industry |
End fitting: brass nickelled Ø 6 mm, length: 20 mm Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: bayonet (2 pins) out of brass nickelled, interior Ø 12 mm, 14 mm or 15 mm Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another bayonet on request |
|
|
Probe thermocouple J with fixing by bayonet for plastic industry |
End fitting: nickelled brass Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: bayonet (2 pins) in nickelled brass, interior Ø 15 mm or 16 mm Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another bayonet on request |
|
|
Probe thermocouple J with fixing by bayonet for plastic industry |
End fitting: stainless hammers Ø 2,5 mm out of 12 mm Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: bayonet (2 pins) in nickelled brass, interior Ø 10 mm or 12 mm Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another bayonet on request |
|
|
Probe thermocouple J with fixing by bayonet with adjustable thrust for plastic industry |
End fitting: stainless Ø 6 mm, length: 20 mm Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: bayonet (2 pins) in nickelled brass, interior Ø 10 mm or 12 mm Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² under flexible device stainless Ø 6 mm Maximum temperature of use: 400 °C Another length of cable or another bayonet on request |
|
|
Probe thermocouple J lined collapsible with fixing by bayonet for plastic industry |
Protection sheath: lined stainless 316 L Standard Ø 3 mm of hot welding: insulated or with the earth Probes: thermocouple J class 1 Connection: bayonet (2 pins) in nickelled brass, interior Ø 10 mm or 12 mm Junction indémontable stainless steel 316 L, Ø 6 mm, length 50 mm Connecting cable: Silk of glass/ Silk of glass/Braid stainless, length 3 meters Obstinate fixed Ø 6 mm, thickness 2 mm Maximum temperature of use: 400 °C
Options: another type of bayonet, protection of the cable by flexible device stainless, achievable probe in version thermocouple K, consult us |
|
|
Probe thermocouple J with bolster for plastic industry |
End fitting: stainless steel 316 L Type of hot welding: insulated or with the earth Probes: thermocouple J Fixing: by screw of 4 mm Connection by bolster stainless 20 mm X 6 mm X 6 mm Connecting cable: silk of glass/silk of glass braids stainless, 2 X 0.22 mm² Maximum temperature of use: +400 °C Another length of cable on request |
|
|
Probe thermocouple J of contact for plastic industry |
End fitting of fixing: brass Type of hot welding: insulated or with the earth Probe: thermocouple J Fixing: by screw of 4 mm Connecting cable: silk of glass/silk of glass/braid stainless, 2 X 0.22 mm² Temperature maximum of use: +400 °C Another length of cable on request |
|
|
Probe thermocouple of contact for plastic industry |
Type of hot welding : insulated or with the earth Probe : thermocouple J or K with brass eyelet nickelled Ø 6,5 mm Connection : sleeve Ø 6 X 30 mm out of stainless 316 L Connecting cable : silk of glass/silk of glass/Braid stainless, 2 X 0.22 mm2 Maximum temperature of use : 400 °C Another length of cable or another dimension of eyelet on request |
|
|
Probe thermocouple J of contact for plastic industry |
Type of welding: heat with the earth Probe: thermocouple J with brass eyelet nickelled Ø 6,5 mm Insulated connecting cable: silk of glass/silk of glass/Braid stainless, 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another dimension of eyelet on request |
|
|
Probe thermocouple J to screw bent for plastic industry special tube |
Protection sheath: bent stainless Ø 5 mm End fitting: stainless steel 316 L Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: connection turning nickelled brass Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another threading on request |
|
|
Probe thermocouple J to screw right for plastic industry special tube |
Protection sheath: right-hand side stainless Ø 5 mm End fitting: stainless steel 316 L Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: connection turning nickelled brass Connecting cable: Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another length of cable or another threading on request |
|
|
Probe smooth thermocouple J bent for plastic industry |
Protection sheath: stainless Ø 6 X 0,4 mm Type of hot welding: insulated or with the earth Probe: thermocouple J Connecting cable: Silk of glass/Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use: 400 °C Another couple, another length of cable on request |
|
|
Probe thermocouple J with collar for plastic industry |
Type of hot welding: insulated or with the earth Probe: thermocouple J Connection: collar stainless of tightening to endless screw Connecting cable: Silk of glass/Silk of glass/Braid stainless 2 X 0.22 mm², length: 2 meters Maximum temperature of use: 400 °C Another couple, another length of cable on request |
|
|
Probe thermocouple J for plastic industry |
Protection sheath : bent stainless Ø 3,5 mm Type of hot welding : insulated or with the earth Probes : thermocouple J Connecting cable : Silk of glass/ Silk of glass/Braid stainless 2 X 0.22 mm² Maximum temperature of use : 400 °C Another couple, another length of cable on request |
|
|
|