|
| Brass thermowell – DGL12-100 |
Gaine de protection en laiton Ø9 mm
Raccord 1/2" gaz cylindrique
Entrée Ø14 sur 11 mm
Vis de blocage M3
Longueur utile : 100 mm |
|
|
| Termowell screw-in tack welded |
Protection sheath stainless steel 316 L, Ø 13,5 X 2,3 mm or Ø 9 X 1 mm
Connection 1/2 " cylindrical gases socket, 1/2 " plug cylindrical gases
For probe of Ø 8 mm (“Ød” = 13 mm) or of Ø 6 mm (“Ød” = 9 mm)
The working length of the spike is equal to the working length of the sensor minus 20 mm possible
Covering PFA, halar, etc…
operating Pressure:
100 bar up to 20 °C
70 bar up to 400 °C |
|
|
| Termowell screw-in tack welded with latch-tightening screw |
Protection sheath stainless steel 316 L, Ø 13,5 X 2,3 mm or Ø 9 X 1 mm
Latch-tightening screw
Connection 1/2 " plug cylindrical gases
For probe of Ø 6 to 8 mm
The working length of the spike is equal to the working length of the sensor minus 10 mm possible
Covering PFA, halar, etc…
operating Pressure:
100 bar up to 20 °C
70 bar up to 400 °C |
|
|
| Termowell screw-in drilled in the earth standardized |
Protection sheath stainless steel 316 L, Ø 16 mm
Connection 1/2 " cylindrical gases socket, 1/2 " NPT or 3/4 " NPT
For probe of Ø 6 to 8 mm
The working length of the spike is equal with the working length of the sensor minus 50 mm
Possible covering halar (fluomère) on plunger
Pressure operating:
100 bar up to 20 °C
70 bar up to 400 °C
Another length on request |
|
|
| Termowell screw-in tack welded |
Protection sheath stainless steel 316 L, Ø 13,5 X 2,3 mm or Ø 9 X 1 mm
Connection 1/2 " cylindrical gases socket
Cone to weld Ø 30 to 25 mm For probe of Ø 6 to 8 mm
The working length of the spike is equal to the working length of the sensor minus 20 mm |
|
|
|
thermocouple temperature probes
Cliquez pour afficher la liste complète
