Heating cartridge - Low temperature
Protection Sheath stainless
Welding TIG
Magnesium compacted oxide core and insulation
Supply voltage 230 V
Electric connection by covered drivers nickel silk of glass, standard length 250 mm
Resistive wire NiCr 80/20
Applications:
- Industry plastic, bakelite, epoxy, polyester and rubber
- Hot Moulds - Refrigerating of absorption
- Heating of metal masses
- Marking Machines - Industry of the bolster
Options:
- Another dimensional range (length: sheath + output flexible, Ø)
- Another electric range (voltage, power)
- Another type of assembly (output bent, cable protected by flexible device stainless,…)
- Another electric End fitting
- Return by the earth
- Differentiated Heating (variable specific heating over the heating length)
- Thimble during the heating of a fluid
Precautions for use:
- Use a product lubricating which will facilitate the assembly and the disassembling of the heating cartridges within their boring while ensuring a good thermal conductibility. See heat-conducting grease silicone (ref. GSTC)
- So not burning the junctions or roasting resistance, take care to leave the electric cable out of boring and introducing the whole of the sheath inside this last
- Protect the electric junctions against moisture, the metal particles which could generate leakage currents.
- Avoid the vibrations and ensure a good mechanical stability it temperature sensor must be placed at 10 mm maximum of the cartridge. The minimum difference between the cartridges is equal to two diameters
Accessory:
Heat-conducting grease silicone (ref. GSTC)
- Is used to conduct the heat by filling space between various materials
- Insulating electric - Does not harden, resists water, not corrosive
- Temperature of use: -60 to + 205 °C - Conservation: > 1 year at temperature lower than 50 °C
- Solvent: trichloréthane
- For higher temperatures, to consult us!
Welding TIG
Magnesium compacted oxide core and insulation
Supply voltage 230 V
Electric connection by covered drivers nickel silk of glass, standard length 250 mm
Resistive wire NiCr 80/20
Applications:
- Industry plastic, bakelite, epoxy, polyester and rubber
- Hot Moulds - Refrigerating of absorption
- Heating of metal masses
- Marking Machines - Industry of the bolster
Options:
- Another dimensional range (length: sheath + output flexible, Ø)
- Another electric range (voltage, power)
- Another type of assembly (output bent, cable protected by flexible device stainless,…)
- Another electric End fitting
- Return by the earth
- Differentiated Heating (variable specific heating over the heating length)
- Thimble during the heating of a fluid
Precautions for use:
- Use a product lubricating which will facilitate the assembly and the disassembling of the heating cartridges within their boring while ensuring a good thermal conductibility. See heat-conducting grease silicone (ref. GSTC)
- So not burning the junctions or roasting resistance, take care to leave the electric cable out of boring and introducing the whole of the sheath inside this last
- Protect the electric junctions against moisture, the metal particles which could generate leakage currents.
- Avoid the vibrations and ensure a good mechanical stability it temperature sensor must be placed at 10 mm maximum of the cartridge. The minimum difference between the cartridges is equal to two diameters
Accessory:
Heat-conducting grease silicone (ref. GSTC)
- Is used to conduct the heat by filling space between various materials
- Insulating electric - Does not harden, resists water, not corrosive
- Temperature of use: -60 to + 205 °C - Conservation: > 1 year at temperature lower than 50 °C
- Solvent: trichloréthane
- For higher temperatures, to consult us!
Ref: CCBC








