espaceur
Log inLog in

Password
OK
Register - Forgotten password
filet
loupe Text OK loupe Reference OK loupe Families OK loupe Several points OK
My basket My basket
622 produits correspondent à votre sélection
previous product previous product (345) Probe “SMART” of interface of impulse input
next product next product (347) Accessories for WEATHER STATION and MICRO STATION
Extension cables for SMART Probes

Extension cables for "SMART" Probes

Available in 5, 10 and 25 meters length, the extensions for probes SMART can be used individually or coupled the ones with the others until a maximum length of 100 meters
Provided with connector RJ11, these extensions are compatible with the external probes for logger HOBO MICRO STATION (H21-002)
The tight case of junction is necessary for all connection in outside or in wet environment
Demande de devis
Obtenir un devis pour ce produit
Ajouter aux favoris
Envoyer à un amiImprimer la ficheTélécharger le PDF
trier les 4 références sur plusieurs colonnes en maintenant la touche shift (MAJ) enfoncée
tri des données en cours...
Reference Description Qty
S-EXT-M005 longueur 5m panier
S-EXT-M010 longueur 10m panier
S-EXT-M025 longueur 25m panier
S-EXT-CASE boîtier étanche panier
Une demande spécifique ? Contactez nous
Produits associés
Pluviometer “SMART” Pluviometer “SMART”
Measurement: counting of swing of a cup stainless
Resolution: 0,2 mm
Measurement bracket: 12,7 cm per hour or 4000 swings of the cup during an interval of measurement (800 mm)
Operating range: 0 °C with +50 °C
Limit of degradation free: -40 °C with +75 °C
Accuracy of calibration: ± 1%
Annual calibration recommended by return in factory
Aluminium collector and case
Dimension (mm): Ø 154 X 228 Weight: 1 kg
Length cables: 2 m
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Probe “SMART” of hygrometry of the ground Probe “SMART” of hygrometry of the ground
For the measurement of the quantity of water presents in the ground
The sensor is not very sensitive to the salinity and the temperature of the ground
Measurement bracket: 0 to 0,57 m3/m3
Operating range: -40 to +50 °C
Accuracy: ±0,033 m3/m3 (± 3%) from 0 to +50 °C; ±0,022 m3/m3 (± 2%) with a specific calibration
Resolution: 0,0008 m3/m3 (0,08%)
Higher lifespan: 3 to 5 years
Dimensions (mm): 160 X 32 X 2
Weight: 190 G
Length connecting cable: 5 m
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Anemometer “SMART” Anemometer “SMART”
For the measurement of the windspeed measurement
Scale : 0 to 45 m/s; max 54m/s
Operating range: -40 °C with +75 °C
Accuracy : ±1,1 m/s
Resolution: 0,38m/s
Lifespan higher than 5 years
Dimensions (mm): 190 X 51
Weight: approximately 300 G
Length connecting cable: 3 m
Option : systeme mounting M-CAB
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Probe “SMART” of photosynthetic light Probe “SMART” of photosynthetic light
Measurement range : 0 to 2500 µmol/m²/sec; wavelength: 400 to 700 nm
Scale of use: -40 °C with +75 °C
Accuracy ±5 µmol/m²/sec or 5%
Resolution: 2,5 µmol/m²/sec
Drift lower than ± 2% per annum
Possible recalibration in factory
Anodic aluminium case
Dimension (mm): Ø 32 X 41
Weight: 120 G
Length connecting cable: 3 m
The probe adapts to the attachment arm (in option). Ref. M-LBB and M-LLA
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Probe “SMART” of atmospheric pressure Probe “SMART” of atmospheric pressure
Measurement range : 600 mb with 1070 mb
Scale of use: -40 °C with +75 °C
Accuracy: ±1,5 mbar on all the range with 25 °C
Resolution: 0,1 mbar
Drift lower than ±0,6mb % per year
Possible recalibration in factory
Dimension (mm): 45 X 48 X 16
Weight: 30 G
Length connecting cable: 100 mm
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Probe “SMART” of pyranometer silicon Probe “SMART” of pyranometer silicon
Measurement range : 0 to 1280 W/m²
Spectrum: 300 to 1100 Nm
Error due to the slope compared to the vertical:
± 5% from 0 to 70 °
± 10% from 70 to 80 °
Accuracy: ±10 W/m² or ± 5%
Azimuth error: ± 2% to 45 ° of the vertical, rotation 360 °
Resolution: 1,25 W/m²
Drift lower than ± 2% per year
Possible recalibration in factory
Anodic aluminium case
Dimension (mm): Ø 32 X 41
Weight: 120 G
Length connecting cable: 3 m
The probe adapts to the attachment arm (in option). Ref. M-LBB and M-LLA
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Micro station 512 K Micro station 512 K
This new logger 4 ways represents a solution at lower cost for a use of probes SMART
Have 4 external inputs for probes SMART
Probes SMART are automatically recognized by the logger as of their connection
Possible extension of the external probes up to 100 meters
Memory: 512 K not bird (can record more than 500.000 measurements)
Recording mode: stop of the recording when the memory is full or recording buckles some with crushing of the first memorized values
Frequency of recording: 1 second at 9 a.m.
Clock accuracy : 0 to 2 seconds for the first point and ±5 seconds/week with +25 °C
Mode of starting: immediate by pushbutton or differed on programmed date and hour
Unloading of the data by continuing or not the recording
Speed of unloading: 2,5 minutes for a complete unloading of 512 K
Visualization of the reading in the course of recording
Operating temperature: - with batteries alkaline: -20 °C with +50 °C - with batteries lithium (in option): -40 °C with +70 °C
Dimensions (mm): Thickness 54 Height 114 Width 89
Weight: 500 G
Assembly: mural fixing or on mast Ø 41 mm due to a kit of assembly in option
Tight case being able to receive 2 interfaces of input current 4-20 my or Voltage, closing by 4 screws
Software of necessary configuration: BoxCar Pro 4.3 or higher version
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
System of data record reconfigurable and modular System of data record reconfigurable and modular
The new logger Hobo FlexSmart is a system of data record reconfigurable and modular for applications of industrial monitoring and energy.
The system 15 ways allows to the professionals management of energy and service to answer quickly and easily many applications of monitoring without necessarily having to buy a complete set of loggers. Innovating, the modules of signal processing enclipsables convert the signals of practically any type of probe; the preset probes Smart “plug and play” as well as the powerful HOBOware software ensure of the easy and fast deployments
1 to 15 ways of data
6 inputs Smart sensors “plug and play” (automatic identification) of temperature, hygroscopy, pulsations
3 slots for connection optional modules Analogical FlexSmart and True RMS
Modulate FlexSmart Analogical 2 ways
- Input sensors 0-20mA and 0-20VDC
- Accuracy ± 0.25% of 50mV at EP
- Power excitation sensor 12 VDC provided by the logger, with programmable time of heating
Modulate FlexSmart True RMS 2 ways
- Accepts in input the converters of current AC (CT) and/or voltage (Pt)
- Measurements specifies sinusoidal and nonsinusoidal signals
The configuration remains preserved in the FlexSmart modules Great non-volatile memory size of 512k allowing long-term recordings
Flexibility of the possibilities of power: internal batteries, external, and/or transformer battery mains AC
Robust case with necessary of fixing in option
Measurements
- Temperature
- Relative Humidity
- current AC (True RMS)
- voltage AC (True RMS)
- kw
- kWh
- Pressure
- Differential Pressure of Air
- CO2
- Inputs Impulses for flowmeter
- Any other sensor with output 4-20mA/0-20 VDC
- Sensors Weather

Applications
- Research & control/Building
- Audits of energy
- Diagnostic HVAC/R (heating, ventilation, air conditioning, refrigeration)
- Measurements and Checks energy saving
- Startup of the buildings
- Checking of outputs
- Studies systems of Compressed air
- Control of the environment
- Classification of equipment
- Detection of intermittent defect
- Setting in conformity according to polycies and standards
- Studies quality of the air
- Monitoring of state of machine
FlexSmart modules
The optional modules FlexSmart True RMS and Analogique assembled on the higher face of the logger ensure a maximum flexibility. These modules two-track make it possible to incorporate converters of current AC or voltage, or sensors with output 0-20mA or 0-20 VDC. Each way can be configured separately. The FlexSmart module provides a power of excitation of 12V and a time of heating of the configurable sensor by the user
Modulate FlexSmart TRMS (ref. S-FS-TRMSA)
- current AC (True RMS)
- voltage AC (True RMS)
Modulate analogical FlexSmart (ref. S-FS-CVIA)
- kw
- Manometric Pressure
- Differential Pressure of air
- Carbon dioxide
- Relative Humidity Temperature assembly drain
- Any sensor with output 4-20mA or 0-20 VDC (appropriate to the sensors 2,5V; 5V and 10V)
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Smart sensor of foliar measurement of watering Smart sensor of foliar measurement of watering
The Smart sensor of foliar measurement of watering is ready with employment and does not require any coating or painting It is composed of a capacitive grid which is less sensitive to the residues of aera than the resistive grid sensors, and allows measurements in conformity with a long-term stability A support of fixing is included, which makes it possible to easily direct the sensor to simulate the characteristics of the plants to be studied Modular connector for easy connection on Station Weather or Micro Hobo Station Scale of measurement: 0 (dryness) to 100% (wet) Type of sensor: Capacitive grid No necessary coating Interchangeability between sensors (in the range 10 90%): ± 10% Repetitivity: ± 5% Resolution: 0,59% Stability: < ± 5% per annum Operating range: -40 °C with 70 °C Numbers of way: 1 Average of measurement: Not Dimensions (mm): - Sensor: 47 X 51 - Tube: Ø 48 X Lg 122 - Length cables: 3 meters - Support of fixing: Lg 200 Weight: - sensor alone 127 grams -290 grams with the support of fixing The sensor can be directed with any angle between 0 and 90° (vertical) Possible assembly on tripod or mast Ø 32 to 41 mm, attachment arm (ref. M-CAA or M-CAB) or plane aera Delivered with clamp of fixing and collar
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
SMART temperature sensor 12 bits S-TMB SMART temperature sensor 12 bits S-TMB

Sonde de température :
- échelle : de -40°C à 100°C
- précision : ±0,2°C de 0 à 50°C
- résolution : 0,03°C à 25°C
- dérive : <±0,1°C par an
- Temps de réponse : 2 min
( à 90% dans un flux d'air à 1m/sec )
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
SMART temperature and humidity probe S-THB SMART temperature and humidity probe S-THB

Sonde de température :
- échelle : de -40°C à 75°C
- précision : ±0,2°C de 0 à 50°C
- résolution : 0,03°C à 25°C
- temps de réponse : 5 minutes
(à 90% dans un flux d'air à 1m/sec)

Sonde d'hygrométrie :
- échelle : 0 à 100% d'humidité de -40°C à 75°C
- pécision : ±2,5% de 10% à 90%
- résolution : 0,1% à 25°C
- temps de réponse : 5 minutes
(à 90% dans un flux d'air à 1m/sec) avec protection

Sondes :
- câble de 2 mètres : S-THB-M002
- câble de 8 mètres : S-THB-M008
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
Barometric pressure transducer  - S-BPB-CM50 Barometric pressure transducer - S-BPB-CM50
Le capteur de pression barométrique SMART à une plage de mesure comprise entre 660mb à 1070mb. La température de fonctionnement de ce capteur est comprise entre -40°C et 70°C. Ce capteur SMART résistant aux intempéries se monte en dehors du boîtier de la station d’acquisition.
Plage de mesure : 600 mb à 1070 mb
Plage d’utilisation : -40 °C à +70 °C
Précision : ±3.0 mbar sur toute la plage à 25 °C
Résolution : 0,1 mbar
Dérive inférieure à 1.0 mbar par an
Recalibration possible en usine
Dimension (mm) : 6.4 cm x 5.1 cm
Masse : 96 g
Longueur câble de raccordement : 50 cm
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances
SMART interface input impulse SMART interface input impulse
Modèle entrée impulsion électronique : S-UCC
Ces adaptateurs d’impulsions sont compatibles avec les relais statiques électroniques tels que les FET ou les sorties à collecteurs ouvert ou signal logique CMOS avec une fréquence maximum en entrée de 120 Hz.
Fréquence max : 120 Hz (120 impulsions par seconde)
Plage : 0 à 65533 impulsions par intervalle d’enregistrement
Câble : 1 ou 6 mètres
Connectique en entrée : 2 fils (les serre-fils sont inclus)
CE – compatible avec les compteurs volumétriques et thermiques à sorties impulsionnelles de chez Sappel et avec les compteurs électriques mono-phasés ou tri-phasés avec sortie impulsionnelle.

Modèle entrée impulsion contact sec : S-UCD
Ces adaptateurs d’impulsions sont compatibles avec les contacts secs tels que les augets des pluviomètres, les capteurs de débit, les commutateurs à lames avec une fréquence maximum en entrée de 2 Hz.
Fréquence max : 2 Hz (2 impulsions par seconde)
Plage : 0 à 65533 impulsions par intervalle d’enregistrement
Câble : 1 ou 6 mètres
Connectique en entrée : 2 fils (les serre-fils sont inclus)
CE
Détails
Prosensor: temperature probes, PT100 probe, thermocouple probe, datalogger, heating resistances

PLATINUM RTD (PT100) PROBES | THERMOCOUPLE TEMPERATURE PROBES | DATALOGGERS WEATHER STATION | HEATING RESISTANCES REGULATION | WEATHER STATION AND MICROCLIMATE STATION | MOBILE MEASURING | MEASURING TRANDUCERS AND GALVANIC INSULATORS | CONTROLLERS AND INDICATORS AND THERMOSTATS | ACQUISITION AND MONITORING | SENSOR TRANSMITTER |

Homepage - Who are we ? - Request for documentation - Downloads - Contact - Newsletter - My basket
Seacrh Families - Advanced search
Equipement et matériel pour les audits énergétiques

PROSENSOR 15, rue de Montvaux 57865 Amanvillers - FRANCE
Phone  (33) 03 87 53 53 53 - Fax (33) 03 87 53 53 55
: www.prosensor.com - Email: info@prosensor.com

Realization: netcomposant
W3C GANDI SSL