Programmable transmitter PT100 4-20mA with connector M12 – 960 PRO

Input: Pt100, 3 wires (IEC60751)
Programmable scale: -200/650°C for 4-20 mA version and -200/600°C for Modbus version
Minimum range: 40°C
Accuracy: ±0.1 %
Output: 4/20 mA, 2 wires or 2-wire RS485 Modbus communication
Isolation: non-isolated
Power supply: 8/35 Vdc via the loop (4-20 mA) or 7/40 Vdc (RS485)
Body: cylindrical in delrin Ø 18mm, length 45 mm
Input connectors: M12 female (Pt100 sensor)
Output connector: M12 male (current 4/20mA)
Operating temperature: -40/85°C
Waterproofing: IP67
Sensor breakage: selectable, >=21mA or <=3.6mA
Sensor short circuit: <=3.6mA
Sensor error compensation:  ~50ms
Load: 700 Ohms at 24Vdc (R=Ualim-8.5)/0.022 (R=Ualim-8.5)/0.022
Long-term stability: ~1% of range

USB programming kit: Ref. SET 960 (software and cable)