Data Miniature Standalone Logger of temperature special for measurements long duration in water
This new logger has a 12-bit resolution and has a probe of accuracy : ±0,2 °C on a broad scale of ambient temperature
This new version has twice more memory, a basic station optical USB functional, and is compatible with new tight shuttle HOBO
Its shaped case is especially designed for recordings of long time out of fresh or salted water
The logger Water temp Pro v2 is equipped with an optical interface for a fast unloading of the data on site, even when the logger is wet
Scale of measurement: 0 °C with +50 °C in water (noncold) -20 °C with +70 °C in the air
Seal up to 120 m
Accuracy: ±0,2 °C from 0 to +50 °C
Resolution: 0,02 °C with +25 °C
Accuracy of the clock: ±1 minute per month
Capacity: 42000 measurements - 12 bits
Interface optical USB high speed, unloading of a logger full in less than 30 seconds
Date and programmable time of departure
Configurable frequency of recording by the user d'1 second at 6 p.m.
Require the HOBOware software for launching and exploitation of the data
Autonomy 6 years (typical), replaceable battery in factory (the extreme temperatures reduce the lifespan of the battery)
Indication of the level of battery during launching Non-volatile memory (preserves the data in the event of worn battery)
Confirmation of the operations by twinkling LED
Stable plastic with UV for a fresh or salted water immersion long-term but not adapted to an exposure prolonged out of chlorinated water
Ensuring case of robust and shaped design of the years of use in hard conditions
The dark gray case is based in its environment, reducing the risks of detection to the minimum S
hock-proof rubber guard in option for situation in important water flow, with remains, or floods
Answer time: 5 minutes in water; 12 minutes in the ventilated air with 2 m/sec, for 90% typical
Memory mode: stop of the recording when the memory is full
Unloading of data: reading of a logger full in less than 30 seconds in the course of recording or to the stop
Materials: polypropylene, stainless steel, joined EPDM
Buoyancy: +13 G (fresh water with 25°C); +17 G with the optional shock-proof guard
Crush lithium 3.6 V only replaceable in factory
Report of realizable checking temperature in option
Dimensions (mm): 114 X 30
Weight : 42 G
Holding ring bored Ø 6,3 mm
This new version has twice more memory, a basic station optical USB functional, and is compatible with new tight shuttle HOBO
Its shaped case is especially designed for recordings of long time out of fresh or salted water
The logger Water temp Pro v2 is equipped with an optical interface for a fast unloading of the data on site, even when the logger is wet
Scale of measurement: 0 °C with +50 °C in water (noncold) -20 °C with +70 °C in the air
Seal up to 120 m
Accuracy: ±0,2 °C from 0 to +50 °C
Resolution: 0,02 °C with +25 °C
Accuracy of the clock: ±1 minute per month
Capacity: 42000 measurements - 12 bits
Interface optical USB high speed, unloading of a logger full in less than 30 seconds
Date and programmable time of departure
Configurable frequency of recording by the user d'1 second at 6 p.m.
Require the HOBOware software for launching and exploitation of the data
Autonomy 6 years (typical), replaceable battery in factory (the extreme temperatures reduce the lifespan of the battery)
Indication of the level of battery during launching Non-volatile memory (preserves the data in the event of worn battery)
Confirmation of the operations by twinkling LED
Stable plastic with UV for a fresh or salted water immersion long-term but not adapted to an exposure prolonged out of chlorinated water
Ensuring case of robust and shaped design of the years of use in hard conditions
The dark gray case is based in its environment, reducing the risks of detection to the minimum S
hock-proof rubber guard in option for situation in important water flow, with remains, or floods
Answer time: 5 minutes in water; 12 minutes in the ventilated air with 2 m/sec, for 90% typical
Memory mode: stop of the recording when the memory is full
Unloading of data: reading of a logger full in less than 30 seconds in the course of recording or to the stop
Materials: polypropylene, stainless steel, joined EPDM
Buoyancy: +13 G (fresh water with 25°C); +17 G with the optional shock-proof guard
Crush lithium 3.6 V only replaceable in factory
Report of realizable checking temperature in option
Dimensions (mm): 114 X 30
Weight : 42 G
Holding ring bored Ø 6,3 mm
Ref: u22-01
Product references
Product references
Reference: U22-001
enregistreur de température
Reference: BOOT-BLK
protecteur caoutchouc noir
Reference: BOOT-WHT
protecteur caoutchouc blanc - OBSOLETE
Reference: FRB-U22
remplacement de la pile en usine
products
ASSOCIATED
