CO2 logger, temperature and humidity Bluetooth MX1102

This Bluetooth® Smart-equipped data logger is designed to communicate wirelessly with an iPhone®, iPod touch®, or iPad®. Using the HOBOmobile™ app for iOS or Android, you can easily set up the data logger, read and view its data on your mobile device, or export the data for later analysis. You can also connect the device via USB to a computer, and use HOBOware™ software. These interfaces also allow you to automatically or manually calibrate the CO2 sensor.

The data logger can calculate minimum, maximum, average, and standard deviation statistics, and trigger visual or audible alarms at thresholds you specify. The device also supports burst logging, in which data is recorded at a different interval when the readings are above or below certain limits. This compact data logger also features an LCD screen that displays real-time measured values, recording mode, battery level, memory used, and more. 

- Operating Range: 0° to 50°C (32° to 122°F) 

- Accuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F) 

- Resolution: 0.024°C at 25°C (0.04°F at 77°F) 

- Drift: <0.1°C (0.18°F) per year 

- Operating Range: 1 to 90% (non-condensing atmosphere) 

- Accuracy: ±2% from 20 to 80% typical at 25°C (77°F) 

- Hysteresis: ±2% of relative humidity 

- Resolution: 0.01% at 25°C (77°F) 

- Drift: <1% per year 

- Operating range: 0 to 5000 ppm 

- Accuracy: ±50 ppm ±5% of the value read at 25°C (0.04°F to 77°F) 

- Preheating: 15 seconds 

- Calibration: Automatic or manual